Fenix ALG-01 high quality gun mount for Weaver/Picatinny rail. Fits a wide range of Fenix torches.
Features:
- Fits torch bodies with 25.4-26mm dia (Fenix TK11, TK12, TK15, TK21, TA20,TA21)
- Spacer included to fit 23.6-24.2mm bodies (Fenix PD31, PD32)
- Weight:51 grammes
- Made from type 60665T aluminium
- Mounting base designed with locking hex screws for Weaver/Picatinny rail
IN STOCK
Add some outstanding engineering to your airgun/rimfire torch mounting system with these specially designed aluminium mounts.
Precision Engineered by Sportsmatch in the UK
25mm (TM3) at £30.95 and 30mm (TM4) at £33.95 are available to suit a wide variety of scopes.
Jointly developed between The Photon Shop, Phil Price of Airgun World, and Sportsmatch Mounts, the TM3 and TM4 have been carefully designed to add ease of use and versatility to your mounting options.
The mounting base can replace the upper scope retaining ring on your existing Sportmatch double screw mounts, or using the supplied retaining ring, the base can be fixed directly to your scope tube. The four fixing screws are accessed from above, making mounting or adjustment of the base quick and easy, whilst the upper mount and torch can be quickly removed with a twist of the thumb screw, no tools needed.
Dimensions - TM3
- Scope dia - 25mm
- Torch dia - 25mm (fits Fenix TK11 R5, TK15 R5 and TK21)
- Spacing of torch body from scope tube - 21.5mm
- Free space needed on scope tube - 20mm (or mount to Sportsmatch double screw scope mount)
Dimensions - TM4
- Scope dia - 30 mm
- Torch dia - 25mm (fits Fenix TK11 R5, TK15 R5 and TK21)
- Spacing of torch body from scope tube - 24mm
- Free space needed on scope tube - 20mm (or mount to Sportsmatch double screw scope mount)
TM3 - 25MM - £30.95, TM4 - 30mm - £33.95
The 4GREER Mount System 1 (MS1) fits scopes of either 25mm, 30mm or 34mm and supports a removable flashlight, with body sizes 21.4mm to 25.4 mm, or the standard 1 inch.
Can be fitted or removed in moments and provides an excellent secure, rugged and flexible mounting solution that allows for the angle of the beam to be adjusted/placed precisely where needed by angling the beam up or down.
Designed to give you the option for each half of the mount to be semi-permanently fitted to both the scope and the mount or to be fully removable.
By removing the thumb screw in the centre of the mount, it will allow you to detach the flashlight in seconds from the lower half of the mount which will remain fixed to the scope. This will allow for easier packing away or for the flashlight to be used as a hand held light.
Made with exceptional tensile and flexural strength U.V. stable material to work under heavy gun recoil, within operating and storage temperatures of -70 C to +171C
Offers minimum 42mm clearance between scope tube and torch body
Very well thought out design and incredibly functional.
.JPG)
Important ! If you have a TK11 R5 purchased after May 2010 please check your tail cap threads, as the newer version now features square cut threads and is compatible only with the AR102 remote switch below. If you're not sure, call us on 02921 157162
Fenix remote switch replaces the tail cap of your Fenix TK10, TK11, TK20 or TA30 and provides a cable mounted pressure pad for intermittent operation of your light when firearm or airgun mounted.
The unit also features a sidewinder clicky switch for constant operation of your flashlight, great for night time navigation etc (whilst keeping your barrel pointed in a safe direction of course)
A superbly engineered accessory, finished in hard anodized aircraft aluminium with a coiled switch lead and durable remote which is rated for 100,000 cycles, plus the excellent addition of a constant - on switch in the body of the tailcap !
- Fits Fenix TK series flashlights (TK10, TK11, TK20) and TA30
- Cable length - 23 cm coiled, 80 cm expanded
- Sidewinder clicky operates independently of remote
- Rated for 1amp current
- Waterproof to IPX-8
- Great for tactical firearm use, airsoft shooting or airgun hunting
IN STOCK Free Shipping
Fenix AR102 remote switch, as above but fits Fenix square cut thread models TA20, TA21, TK11 R5, TK12, TK15 and TK21.
IN STOCK Free Shipping
A quality torch mount which features a one inch mounting ring at both ends for fitting of a one inch bodied flashlight such as the Fenix TK11 to a one inch bodied rifle scope. The mount splits centrally for mounting to your torch and scope and features two 20mm accessory rails at the torch end for mounting of a laser.
This mount is included as a free choice with our lamping kits. Please click here for details.
- Fits Fenix TK10, TK11 and TK11 R2 torches
- Suitable for airgun or rimfire
- Allen key supplied.
- Fits for scopes with a bezel dia up to 44mm
- Can be used with all 2 piece and most one piece scope mounts
- Torch body held 21mm from scope body
- Space needed on scope body = 18mm
IN STOCK
A quality mount for fixing your TK10, TK11 or TK11R2 torch to a 20mm accessory rail using the supplied allen key.
- Aluminium construction
- Length - 45mm
- Fits torches - 25MM diameter
IN STOCK
Featuring a flexible rubber block with a one inch moulded cutout for scope mounting and a 20mm cutout for mounting of torches up to 25mm diameter, the flexible mount and flashlight are fixed in place quickly and securely with velcro straps.
This mount is included as a free choice with our lamping kits. Please click here for details.
- Suitable for scopes with objective bell up to 50mm dia
- Space needed on scope body = 23mm
- Torch body held 18.5 mm from scope body
IN STOCK Free Shipping
A high quality mount for fixing your one inch diameter torch to a gun barrel of up to 18mm diameter.
Offering great versatility the mount seperates into two pieces using the central thumb screw offering the following options.
- Mount a one inch torch to your gun barrel (don't forget to re - zero)
- Seperate the mount and fit a 20mm accessory rail to your barrel
- Seperate the mount and fit a one inch dia torch to your existing 20mm rail
- Fit a laser of up to 18mm dia to your scope
IN STOCK
