The Lumapower MVP 'Turboforce' edition searchlight features an SSC P7 LED driven at high output and housed in a large textured aluminium reflector. This combination delivers an intense hotspot for excellent beam throw AND a wall of bright spill light to illuminate your surroundings.
The MVP Turboforce offers four levels of output, switched via the body mounted sidekick switch, a forward click switch built into the tailcap for momentary or constant - on lighting and state of the art digital current regulation for non dimming output.
The sidekick level switch enables any of the three constant output levels or blinding tactical strobe to be pre set by the user ready for activation by the tailcap switch.
- LED : SSC P7 4 core
- 3 levels of brightness + tactical strobe - 100%, 30 %, 5% + 12 HZ strobe
- Highly efficient heat management keeps the LED operating at best performance
- Highly efficient circuit offers high output with long runtime
- High out = 100 minutes to 50% -- Med out = 350 minutes to 50%-- Low out = 1500 minutes to 50% (2 x 2200mah 18650 batteries)
- Anti roll body design
- Anti reflective coated lens
- Over discharge protection at 4.2v (2 x lithium rechargeable cells)
- Hard anodize finish (Type 111)
- Removable extended battery tube
- Dimensions: Length: 264mm, Bezel Diameter: 71mm, Body Diameter: 28mm, Tail cap Diameter: 32mm, Reflector Diameter: 60mm, Weight: 463g (without batteries)
- Accessories : Spare O-rings
The versatile MVP Turboforce can be driven by -
- 2 X rechargeable 3.7 volt CR123 batteries with body section removed
- 2 X 17650, 17670 or 18650 3.7 volt rechargeable batteries for best performance
- Four CR123 lithium primaries for emergency use. Lithium primaries can be used safely for long periods on low and mid settings or a maximum of 4 minutes at high output setting.
Batteries and charger not included.
TEMPORARILY OUT OF STOCK
The Lumapower MVP offers an awesome 700 lumens maximum output - outperforming many more expensive HID flashlights. The MVP integrates the new Lumapower "sidekick" power adjustment switch into the body of the light, easily accessed by your thumb, whilst on / off and momentary functions are operated via the conventional tailcap Tactical forward click switch. This unique switching arrangement enables any of the three constant output settings or devastating 650 lumen Tactical strobe to be pre set by the user without having to cycle through the levels every time the light is operated.
The versatile MVP offers slightly greater beam throw than the Turboforce edition and can be driven by -
- 2 X rechargeable 3.7 volt CR123 batteries with body section removed
- 2 X 17650, 17670 or 18650 3.7 volt rechargeable batteries for best performance
- Four CR123 lithium primaries for emergency use. Lithium primaries can be used safely for long periods on low and mid settings or a maximum of 4 minutes at high output.
Specification
- LED : Cree XR-E Q5 x 3
- Powerful flood and throw in balance
- Output : 50 Lumens to 700 Lumens. High / 100% - Mid / 25% - Low / 5%
- Runtime : 75 minutes at High, 5 hours at medium, 41 hours at Low (2x18650 @2600mAH)
- The "Sidekick" brighness control works individually from the power switch
- High speed tactical strobe (12 HZ)
- Reflector : Smooth type x 3
- Anti reflective coated lens with anti shock protection
- Advanced thermal design efficiently transfers heat from the LED engine to the body
- Stylish anti roll design
- High grade aircraft T7 aluminium construction
- Built in over voltage protection
- Input Voltage : 6.5V to 12.5V
- Fully regulated with a highly efficient DC / DC circuit
- Batteries : Rechargeable Li-ion x 2 (18650 recommended for best performance)
- Length : 236mm, Bezel Diameter : 60mm, Body Diameter : 28mm, Tail cap Diameter : 32mm, Reflector Diameter : 20mm
- Weight : 383g (without battery installed)
- Material : T7 aircraft aluminum with Type III Hard Anodize finish
- Accessories : spare o-rings (for battery tube)
Click here for more images of the Lumapower MVP.
Click here to go to our 18650 lithium rechargeable batteries page. 2 X AW 18650 rechargeable batteries recommended.
CAUTION : Primary CR123A batteries are not intended to be a primary battery source for the MVP and should only be used for backup/emergencies. The 12V output of 4 primary CR123A's and their increasing resistance due to the high current load of the MVP means they they can damage the light or become over-heated. As the current demand is only problematic on the high output setting primary CR123A batteries can be used with the light on the LOW and MEDIUM settings safely but if used on the HIGH setting runtimes must be kept under 4 minutes or damage will occur. LumaPower will not warrant lights that have failed due to failure to follow these directions.
IN STOCK Free First class recorded delivery.
(1).JPG)
The new Lumapower MRV Sidekick flashlight is is optimized for long beam throw through its use of a wide, deep reflector. This new model also features the unique Lumapower 'sidekick' switching system first introduced on the MVP. This allows the user to pre-set any one of the MRV's three power levels without having to cycle through them every time the light is switched on. You can even change levels while the MRV is turned off. On - off and momentary - on functions are operated by the conventional tailcap Tactical forward click switch.
Lumapower MRV Sidekick features
- Wide input voltage range allows us of one 18650/17670/17650 rechargeable battery, two primary CR123 non rechargeable or two RCR 123 rechargeable lithium batteries
- Cree XRE Q5 LED
- Output from 30 to 265 lumens via three regulated power levels.
- Runtimes - 150 minutes to 50% at Hi out using 1 x 18650, 2200mah. 75 minutes at Hi out using 2 x CR123A
- Input voltage - 2.5 to 8.4 V
- Length 175 mm, dia tailcap 29mm/ body 25.4mm/ reflector 38mm
- Weight 221g without battery
- Construction - T6 aircraft aluminium with type 111 HA coating
Supplied accessories - Two interchangeable reflectors, one smooth for massive throw, one textured for a smooth beam. Spare o-rings.
IN STOCK Free First Class recorded delivery.
